Description
With 2.0 to 2.5 ton weight, smaller structure and more flexible operation, Cushion tires forklift is well-suited to apply to confined space.

Advantages
1. Flexible operation.
Compared with the same type of truck lift, the length, wheelbase and turning radius of this Cushion tires forklift has reduced by 220mm (2.5T), 200mm and 210mm (2.5T), making it more flexible to operate and more suited to be applied in confined space.

2. Fewer emission.
K21 engine, gasoline and liquefied gas mixed fuel as well as ternary catalytic silencer and microcomputer closed-loop control system are available for this Cushion tires forklift to minimize emissions and satisfy air circulation requirements of confined space.

3. Humanized operating system.
The operating system, designed in accordance with principles of ergonomics, allows easier operation of the operator. The cylinder bracket that is easy to assemble and disassemble facilitates working.

Forklift Performance

SPECIFICATION	Item		FCG20	FCG25
	Load Capacity	kg	2000	2500
	Load Center	mm	500
DIMENSIONS	Max. Lifting Height (VM300)	mm	4800
	Free Lift (VM300)	mm	1116
	Fork Size (L × W × T)	mm	1070 × 122 × 40
	Overall Length (without fork)	mm	2258	2310
	Total Width	mm	1150
	Mast Height (fork lowering)	mm	2156
	Overall Height Fork Raised	mm	5830
	Height to Head Guard	mm	2120
	Truck Weight	kg	3445	3795
TIRES	Front / Rear		2/2
	Front Axle		21× 8 × 15
	Rear Axle		16.25 × 6 × 11.25
ENGINE	Model		NISSAN K21
	Rated Power	kw/rpm	31.2 / 2250
	Rated Torque	Nm/rpm	144 / 1600
	Number of Cylinders		4
	Dislacement	L	2.065

Optional Engine
FCG20,FCG25: NISSAN K21

• Components of Forklift
• 1. Engine: power of this Cushion tires forklift. It converts thermal energy into mechanical energy.
• 2. Transmission mechanism: includes the clutch, the transmission, main transmission device, differential mechanism and half shaft, etc.
• 3. Control mechanism: consists of the steering system and the braking system.
• 4. Working mechanism: includes inside and outside mast, fork frame, cargo fork, lifting chain, roller, pulley, etc. It’s mainly utilized to lift and lower, get or stack cargos.
• 5. Hydraulic system: consists of the fuel tank, hydraulic pump, distributor, lifting hydraulic cylinder, tilted hydraulic cylinder. It’s applied to lift and lower as well as tilt cargos.
• 6. Electrical system: includes the power source part and the power usage part. It consists of storage battery, generator, starter motor, ignition system, lighting system, speaker, etc.

Forklift Performance

Economical:	1. Excellent dynamic performance combined with economical efficiency. 2. Reliable hydraulic transmission system. 3. High-quality and responsive maintenance service.
Safe:	1. Put emphasis on the safety of all operators. 2. The design of this Cushion tires forklift complies with a variety of safety standards and specifications. 3. Highly effective and reliable to meet needs of adverse working conditions.
Easy to operate:	1. Excellent operating performance to reduce fatigue. 2. Broad view makes operation easier.
Easy to maintain:	1. An increased open angle of the engine cover offers easy service access. 2. Front and rear baseplates can be installed without bolts, facilitating assembly and disassembly. 3. Fuses, relays and the oil water separator are installed at the location under the cover which is easy to access.

Notes

Users need to fully know the working condition of the lift truck before choosing the appropriate model and configurations.

Operating Instructions

1. Only drivers with appropriate training and holding driver license can drive the lift truck.
2. Check the control and alarming mechanism, and any damage or defect shall be repaired before driving.
3. Cargoes lifted shall not exceed the specified load. The cargo fork shall entirely get in the cargo. Put the cargo evenly on the fork, and using a single fork to get the cargo is not allowed.
4. Smoothly start this Cushion tires forklift, turn the direction, brake and stop the lift truck. Slow down when driving on wet or slippery road or turning direction.

Maintenance of Lift Truck

1. Daily maintenance is necessary after each shift of work.
2. Level 1 technical maintenance after 100 accumulated working hours, approximately every 2 weeks.
3. Level 2 technical maintenance after 500 accumulated working hours, approximately every quarter.

Packaging and Transportation

Maritime shipping in containers

Others

1. Low vibration and noise ---to satisfy the needs of people and their living environment.
2. Low fuel consumption---Hourly fuel consumption will not exceed 6 liters under high working intensity.